High Transparency injection liquid silicone rubber

l Excellent high transparency, and good elasticity.

l Good fluidity, fast vulcanization, safer and more environmental, can fully meet food grade requirements.

l Liquid silicone is suitable for injection molding process, anti-yellowing, heat aging resistance, excellent tear strength

l Fast forming speed, light proportion, and very little waste

Product introduction:

Characteristics:

l Excellent high transparency, and good elasticity.

l Good fluidity, fast vulcanization, safer and more environmental, can fully meet food grade requirements.

l Liquid silicone is suitable for injection molding process, anti-yellowing, heat aging resistance, excellent tear strength

l Fast forming speed, light proportion, and very little waste

Application:

l Baby silicone bottle and nipple

l Goggles

l Suitable for injection moulding.

Product Description

l The product is divided into two parts, A and B.

l Good flow properties and fast forming speed

l Suitable for injection molding

l Hardness Range:15-70

l Products meet ROHS environmental requirements, SGS/FDA/LFGB/PAHS/REACH/ROHS/VOM approved

Package

l 20/200 kg / barrel

Specification Data sheet

ITEM	Requirement
ITEM	LSR9610A/B	LSR9620A/B	LSR9630A/B	LSR9640A/B	LSR9650A/B	LSR9660A/B	LSR9670A/B
Appearance	High transparency, without obvious mechanical impurities
Density，g/cm³	1.11±0.03	1.12±0.03	1.13±0.03	1.14±0.03	1.14±0.03	1.15±0.03	1.15±0.03
Hardness，Shore A	10±2	20±2	30±2	40±2	50±2	60±2	65±2
Tensile strength，MPa ≥	3.0	6.0	7.0	7.5	8.0	8.0	7.5
Elongation，％ ≥	600	700	700	600	450	400	300
Tear strength，kN/m ≥	8	10	15	18	22	22	22